Our Products
Brand: TORK CRAFT
MPN: POL06-2G-SK07
Tork Craft Spindle Lock Comp (14–18) For POL06-2G
At a Glance: Complete genuine spindle lock assembly for the Tork Craft POL06-2G polisher
The Tork Craft spindle lock complete assembly (Cat No. POL06-2G-SK07) is a genuine spare designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher.
The spindle lock is the mechanism that safely holds the spindle still while you change backing pads, bonnets or accessories.
If any part of this mechanism is worn, damaged or m..
N$ 5.29
Ex VAT:N$ 4.60
Brand: TORK CRAFT
MPN: TCAG0115-SK05
Tork Craft Spindle Lock Pin & Spring (19/20) Service Kit (TCAG0115-SK05)
At a Glance: Spindle lock pin and spring replacement kit (parts 19 & 20) for the Tork Craft TCAG0115 angle grinder
The spindle lock is the small but mighty helper that makes disc and accessory changes quick and controlled. If your lock button feels weak, doesn’t “bite”, or slips when you try to loosen a flange nut, chances are the lock pin and/or spring has worn or been damaged. The Tork Craft TCAG0115-SK05 Sp..
N$ 14.49
Ex VAT:N$ 12.60
Brand: TORK CRAFT
MPN: TCAG0230-SK05
Tork Craft Spindle Lock Pin & Spring (24/25) Service Kit (TCAG0230-SK05)
At a Glance: Spindle lock pin and spring replacement kit (parts 24 & 25) for the Tork Craft TCAG0230 angle grinder
The spindle lock is your disc-change sidekick: press it, lock the spindle, loosen the flange nut, swap the disc, and carry on. When the lock button feels weak, won’t engage properly, or slips under torque, the usual culprits are a worn lock pin or tired spring (often after accidental engagement wh..
N$ 14.49
Ex VAT:N$ 12.60
Brand: FLEXIPADS
MPN: FLEX 48110
Hard face spindle pad
Ø 6mm
GRIP (Hook & Loop) hard face spindle pad
The spindle pad fits most electrical drills
Abrasives for spindle pad - Ø 50mm..
N$ 219.08
Ex VAT:N$ 190.50
Brand: TORK CRAFT
MPN: TCCS0185-SK04
Tork Craft Spindle Gear & Bearing Kit (9-19) Service Kit (TCCS0185-SK04)
At a Glance: Spindle gear and bearing component kit (parts 9–19) for the Tork Craft TCCS0185 cut-off saw
On a cut-off saw, the spindle and gear train take serious load every time the disc bites into material. When bearings wear or gears start running out of alignment, you’ll typically hear harsh gearbox noise, feel extra vibration, or notice play that affects cutting accuracy and disc stability. The Tork Craft TCC..
N$ 381.23
Ex VAT:N$ 331.50
Brand: FESTOOL
MPN: FES485332
Festool Spiral blade HS 82 RW
Order number: FES485332
Model: HS 82 RW ..
N$ 1,270.18
Ex VAT:N$ 1,104.50
Brand: FESTOOL
MPN: FES488503
Festool Spiral blade HW 65
Order number: FES488503
Model: HW 65 ..
N$ 651.48
Ex VAT:N$ 566.50